KM1 - Kube series - Ascon Tecnologic

​Controller with independent timer - Ascon Tecnologic

The KUBE Series of AsconTecnologic is a range of user-friendly and cost-effective controllers. The controllers are equipped with EVO green for energy saving, VO tune for auto-tune PID parameters "push and forget" and EVO tools for configuration with codes for quick start and programming key for instant parameterisation. 

KR1 - Kube series - Ascon Tecnologic

Controller with independent timer - Ascon Tecnologic

The KUBE Series of AsconTecnologic is a range of user-friendly and cost-effective controllers. The controllers are equipped with EVO green for energy saving, VO tune for auto-tune PID parameters "push and forget" and EVO tools for configuration with codes for quick start and programming key for instant parameterisation. 

KX1 - Kube series - Ascon Tecnologic

Controller with independent timer - Ascon Tecnologic

The KUBE Series of AsconTecnologic is a range of user-friendly and cost-effective controllers. The controllers are equipped with EVO green for energy saving, VO tune for auto-tune PID parameters "push and forget" and EVO tools for configuration with codes for quick start and programming key for instant parameterisation. 

R38 - Ascon Tecnologic

Entry level controller - Ascon Tecnologic

• Panel mount controller 78 x 35 mm
• 1 Configurable probe input
• Up to 2 outputs
• ON/OFF control and PID single action
• Compressor protection timer
• Available with "Sensitive Touch" and extractable terminal block

TLK43 - TLK series - Ascon Tecnologic

Temperature controller with universal input - Ascon Tecnologic

48x48 mm panel mount controller with dual display, 1 probe input and up to 4 relay outputs
Optionals: 1 digital input (alternative to out 4), current transformer input and RS485 serial port

TLK72 - TLK series - Ascon Tecnologic

Controller with programmable input - Ascon Tecnologic

72x72 mm panel mount controller with single display, 1 probe input and up to 4 digital outputs
Optionals: 1 digital input and RS485 serial port

TLK94 - TLK series - Ascon Tecnologic

Controller with universal input - Ascon Tecnologic

48x96 mm panel mount controller with dual display, 1 probe input and up to 6 relay outputs or 2 analogue outputs and 4 relay outputs
Optionals: Current transformer input, 2 digital inputs and RS485 serial port

TLK96 - TLK series - Ascon Tecnologic

Controller with programmable input - Ascon Tecnologic

96 x 96 mm panel mount controller with single display, 1 probe input and up to 2 outputs

C1 - Gammadue series - Ascon Tecnologic

1/32 DIN controller, indicator, transmitter - Ascon Tecnologic

The Gammadue series C1 line of Ascon is small, easy and complete. Easy configuration and simple operating mode. The smallest line of Gammadue series concentrates the fuinctionality of the temperature controller-indicator-transmitter without loosing the typical characteristics of more complex devices like: auto tune, IP65 front panel protection, serial communications, continuous retransmission output, custom linearisation, and transmitter power supply.

• Panel mount controller, 24 x 48mm
• Configurable input
• Up to 2 digital outputs and 1 analogue output (Retransmission)
• RS 485 ModBus RTU slave serial port
• 1 display, 4 digits

Configurable as:

• Indicator with two alarms
• Transmitter, using 4... 20mA output
• Process controller with digital output

M1 - Gammadue series - Ascon Tecnologic

1/16 DIN controller, indicator, transmitter - Ascon Tecnologic

The Ascon Gammadue M1 serie is flexible, easy and comprehensive. This 48 x 48 size controller is suitable for a wide range of applications. Easy configuration and a simple operating method are merged with the typical characteristics of more complex devices like: autotune, IP65 front panel protection, serial communications, analogue retransmission output, custom linearisation, transmitter power supply, Start-up and Timer special functions.

• Panel mount controller: 48x48 mm
• Configurable input
• Up to 2 digital outputs and 1 analogue output (Retransmission)
• RS 485 ModBus RTU slave serial port
• 1 display, 4 digits

Configurable as:

• Indicator with two alarms
• Transmitter, using 4...20mA output
• Process controller with digital output

X3 - Gammadue series - Ascon Tecnologic

1/8 DIN Double action controller with analogue output - Ascon Tecnologic

The Gammadue series X3 line of Ascon Tecnologic is a double action controller with analogue output. Including Auto/Manual selection and digital inputs for external activation of:

• Stored Setpoints
• Timer function
• Setpoint programmable profile

The Gammadue X3 line is simple, yet is suitable to satisfy almost all control needs:

• Time proportioning
• Analogue
• Single or double action
• Valve drive

Q3 - Gammadue series - Ascon Tecnologic

1/4 DIN Double action controller with analogue output - Ascon Tecnologic

The Gammadue series Q3 line of Ascon Tecnologic is a double action controller with analogue output. Including Auto/Manual selection and digital inputs for external activation of:

• Stored Setpoints
• Timer function
• Setpoint programmable profile

The Gammadue Q3 line is simple, yet is suitable to satisfy almost all control needs:

• Time proportioning
• Analogue
• Single or double action
• Valve drive

M2 - Gammadue series - Ascon Tecnologic

1/16 DIN temperature controller for hot runners - Ascon Tecnologic

The Gammadue series M2 line of Ascon Tecnologic is designed to meet the special requirementsop the plastic industry and more specifically of the hot runners applications. Selective set point modification from digital input within a bank of controllers, freezing of the controller output to the most suitable value in case of emergency conditions, momentary target set point visualisation during machine start-up and front key lock are the typical functions required by hot runners machines.

• Panel mount controller: 48x48 mm
• 1 Configurable input, 1 C/T input and 1 digital input
• Up to 3 Digital outputs
• PID single action or double action (Heat/Cool)
• Setpoint change from digital input (optional)
• Outputs at safety value in case of error
• 2 display lines, 4 digits each, green colour

M3 - Gammadue series - Ascon Tecnologic

1/16 DIN heat/cool temperature controller - Ascon Tecnologic

The Ascon Gammadue M3 serie is flexible, easy and comprehensive. This 48 x 48 size controller is suitable for a wide range of applications. The M3 performs Heat/Cool control and provides on auxiliary current transformer input. Easy configuration and a simple operating method are merged with the typical characteristics of more complex devices like: autotune, IP65 front panel protection, serial communications, analogue retransmission output, custom linearisation, transmitter power supply, Start-up and Timer special functions.

• Panel mount controller: 48x48 mm
• 1 Configurable input and 1 C/T input
• Up to 3 Digital outputs and 1 analogue output (Retransmission)
• PID single action or double action (Heat/Cool)
• RS 485 ModBus RTU port (optional)
• 2 display lines, 4 digits each, green colour

M4 - Gammadue series - Ascon Tecnologic

1/16 DIN Double action controller with analogue output - Ascon Tecnologic

The Gammadue series M4 line of Ascon Tecnologic 48 x 48 mm size controller is suitable for a wide range of applications. It performs Heat/Cool control and provides on auxiliary current transformer input. Easy configuration and simple operating method are merged with the typical characteristics of more complex devices like: autotune, IP65 front panel protection, serial communications, analogue control output, Auto/Man, custom linearisation, transmitter power supply, Start-up and Timer special functions.

• Panel mount controller: 48x48 mm
• 1 Configurable input, 1 C/T input and 1 digital input
• Up to 3 Digital outputs and 1 analogue output
• PID single action or double action (Heat/Cool)
• RS 485 ModBus RTU port (optional)
• 2 display lines, 4 digits each, green colour

X1 - Gammadue series - Ascon Tecnologic

1/8 DIN Heat/Cool temperature controller - Ascon Tecnologic

The Gammadue series X1 line of Ascon Tecnologic is ideal for Heat/Cool control, with the capacity to check the load current by current transformer. Three relay outputs (one SPDT) and an analogue retransmission output, powerful Timer and Start-up special functions. This controller, the simplest of the gammadue 48x96 series, is a very cost-effective instrument allowing you to buy only what you really need to satisfy your requirements.

• Panel mount controller: 48 x 96 mm
• 1 Configurable input
• 1 optional auxiliary input
• Up to 4 digital outputs
• 1 optional analogue output
• ON/OFF , PID single or double action with
     *  Start-up + Timer (optional)
     *  Remote setpoint
     *  2 memorized setpoints
• RS 485 ModBus RTU slave serial port
• 2 Display lines:
     *  4 digits (PV) h: 12 mm 
     *  4 digits (SP) h: 9 mm
     *  Green colour

Q1 - Gammadue series - Ascon Tecnoloigc

1/4 DIN Heat/Cool temperature controller - Ascon Tecnologic

The Gammadue series Q1 line of Ascon Tecnologic is a Heat-Cool temperature controller. Ideal for Heat/Cool control, with the capability to check the load current by current transformer. Three relay outputs (one SPDT) and an analogue retransmission output, powerful Timer and Start-up special functions. The Q1 line, the simplest of the gammadue 96x96 series, is a very cost-effective instrument allowing you to buy only what you really need to satisfy your requirements.

• Panel mount controller: 96 x 96 mm
• 1 Configurable input
• 1 optional auxiliary input
• Up to 4 digital outputs
• 1 optional analogue output
• ON/OFF , PID single or double action
• RS 485 ModBus RTU slave serial port
• 2 Display lines