DA561 - Inor

Isolation transmitter for mA/V signals with 2-wire transmitter supply - Inor
 

DA561 is specially designed for signal isolation and load amplification in the process industry.
A 2-wire transmitter can be connected to and supplied from the isolation amplifier. DA561 maintains a high isolation level (1,5 kV) between input and output. Current and voltage can be chosen independently as input and output signals.

• Current and voltage input
• Current and voltage output
• Direct connection of 2-wire transmitter
• Output test terminals
• 1 500 V isolation level
• Short response time
• High noise immunity
• Available for AC or DC power supply
• DIN-rail mounting
• Plug-in screw terminals

DA562 - Inor

Dual Channel Isolation Transmitter for mA/V Signals - Inor
 

DA562 is specially designed for signal isolation and load amplification in the process industry. Two independent and galvanically isolated channels allow for high-density mounting.
DA562 maintains a high isolation level (1,5 kV) between input, output and the two channels. Current and voltage can be chosen independently as input and output signals.

• Two fully independent isolated channels
• Current and voltage input
• Current and voltage output
• Output test terminals
• 1 500 V isolation level
• Short response time
• High noise immunity
• Available for AC or DC power supply
• DIN-rail mounting
• Plug-in screw terminals

IsoPAQ-11L - Inor

1-channel loop powered isolator for separation of 0(4)-20 mA signals - Inor
 

IsoPAQ-11L is 1-channel loop powered isolator used for electrical isolation of 0(4)-20 mA signals to avoid measurement errors due to different voltage potentials or ground loops in an instrument installation.

The isolator does not need any power supply, which contributes to reduced installation costs compared to isolation transmitters. The high reliability ensures a safe system operation and low maintenance costs.

• Input to output galvanic isolation
• No power supply required
• Low voltage drop
• High accuracy
• High-density DIN-rail mounting
• Plug-in screw terminals

IsoPAQ-12L - Inor

2-channel loop powered isolator for separation of 0(4)-20 mA signals - Inor
 

IsoPAQ-12L is a 2-channel loop powered isolator used for electrical isolation of 0(4)-20 mA signals to avoid measurement errors due to different voltage potentials or ground loops in an instrument installation.

IsoPAQ-12L offers a very cost effective alternative combined with a high-density mounting.

The isolator does not need any power supply, which contributes to reduced installation costs compared to isolation transmitters. The high reliability ensures a safe system operation and low maintenance costs.

• Input to output galvanic isolation
• No power supply required
• Low voltage drop
• High accuracy
• High-density DIN-rail mounting
• Plug-in screw terminals

IsoPAQ-21L - Inor

1-channel loop powered isolators for 0(4)-20 mA signals with high isolation and protective separation - Inor
 

IsoPAQ-21L is a 1-channel loop powered isolator used for electrical isolation of 0(4)-20 mA signals to avoid measurement errors due to different voltage potentials or ground loops in an instrument installation.

The isolator needs no power supply, which contributes to reduced installation costs compared to isolation transmitters. The high isolation level of 4 kV provides an effective protection for downstream devices.

The high reliability and the Protective Separation are additional features that ensure a safe system operation.

• Input to output galvanic isolation
• No power supply required
• Low voltage drop
• Protective Separation acc. to EN 61140
• High accuracy
• High-density DIN-rail mounting
• Plug-in screw terminals

IsoPAQ-22L - Inor

2-channel loop powered isolators for 0(4)-20 mA signals with high isolation and protective separation - Inor
 

IsoPAQ-22L is a 2-channel loop powered isolator used for electrical isolation of 0(4)-20 mA signals to avoid measurement errors due to different voltage potentials or ground loops in an instrument installation.

The isolator need no power supply, which contributes to reduced installation costs compared to isolation transmitters. The high isolation level of 4 kV provides an effective protection for downstream devices.

IsoPAQ-22L offers a very cost effective alternative combined with a high-density mounting. The high reliability and the Protective Separation are additional features that ensure a safe system operation.

• Input to output galvanic isolation
• No power supply required
• Low voltage drop
• Protective Separation acc. to EN 61140
• High accuracy
• High-density DIN-rail mounting
• Plug-in screw terminals

IsoPAQ-632 - Inor

Signal splitter/repeater with double outputs for mA and V signals - Inor
 

The Signal Splitter/Repeater IsoPAQ-632 is used for isolation, conversion and distribution of 0/4 … 20 mA, 0/1 … 5 V and 0/2 … 10 V standard signals. The measuring input can also supply the loop power for 2-wire transmitters.

The input and two isolated outputs can be easily configured by using DIP switch. Due to the calibrated range selection no further adjustment is necessary.

The auxiliary power can be supplied via the connection terminals or via the optional In-Rail-Bus connector. A green LED on the front of the unit has been provided to monitor the power supply.

IsoPAQ-Connect - Inor

In-Rail-Bus power terminal - Inor
 

The 6.2 mm wide IsoPAQ-Connect power terminal is used for supplying the In-Rail-Bus DIN rail connector with supply voltage. Two separate and reverse polarity protected voltage inputs allow a redundant voltage supply of 24 V DC and a maximum current of 3 A (recommended fuse: 3,5 A, Slowblow).

The status of the power supply of both voltage inputs will be displayed each by a LED on front. A green LED lights up when there is supply voltage on the voltage input. A red LED indicates reversed polarity.

IsoPAQ-30P - Inor

Basic isolation transmitter for unipolar mA/V signals with calibrated range selection - Inor
 

The Isolation Transmitter IsoPAQ-30P is a low-cost transmitter used for basic isolation and conversion of 0-20 mA, 4-20 mA and 0-10 V unipolar signals.
Due to the calibrated range selection of the input/output signals and the universal power supply, IsoPAQ-30P provides excellent flexibility and low storage and installation costs. The high reliability ensures a safe system operation and low maintenance costs.

• Calibrated range selection
• Universal power supply for 20 to 253 VAC/DC
• 3-port isolation
• High-density DIN-rail mounting
• Plug-in screw terminals
• Excellent reliability

IsoPAQ-40P - Inor

High-performance isolation transmitter for unipolar mA/V signals with calibrated range selection - Inor
 

The Isolation Transmitter IsoPAQ-40P is used for high-precision isolation and conversion of 0-20 mA, 4-20 mA and 0-10 V unipolar signals.
Due to the calibrated range selection of the input/output signals, the selectable bandwidth and the universal power supply, IsoPAQ-40P provides excellent flexibility and low storage and installation costs.
The high reliability and the Protective Separation are additional features that ensure a safe system operation.

• Calibrated range selection
• Protective Separation acc. to EN 61140
• High accuracy
• Universal power supply for 20 to 253 VAC/DC
• 3-port isolation
• High-density DIN-rail mounting
• Plug-in screw terminals
• Excellent reliability

IsoPAQ-41P - Inor

High-performance isolation transmitter for unipolar mA/V signals with fixed ranges - Inor
 

The Isolation Transmitter IsoPAQ-41P is used for high-precision isolation and conversion of 0-20 mA, 4-20 mA and 0-10 V unipolar signals.
For applications where normally only one signal combination is used, IsoPAQ-41P offers a cost-effective alternative.
The high reliability and the Protective Separation are additional features that ensure a safe system operation.

• Fixed ranges
• Protective Separation acc. to EN 61140
• High accuracy
• Universal power supply for 20 to 253 VAC/DC
• 3-port isolation
• High-density DIN-rail mounting
• Plug-in screw terminals
• Excellent reliability

IsoPAQ-51P - Inor

High-performance isolation transmitter for unipolar mA signals with fixed range and zero/span adjustment - Inor
 

The Isolation Transmitter IsoPAQ-51P is used for high-precision isolation of 0(4)-20 mA unipolar signals. For applications where normally only one signal combination is used, IsoPAQ-51P offers a cost-effective alternative.
The zero and span adjustments allow for a fine-tuning of the measurement loop. The high reliability and the Protective Separation are additional features that ensure a safe system operation.

• Fixed ranges
• Zero/Span Adjustment
• Protective Separation acc. to EN 61140
• High accuracy
• Universal power supply for 20 to 253 VAC/DC
• 3-port isolation
• High-density DIN-rail mounting
• Plug-in screw terminals
• Excellent reliability

IsoPAQ-60P - Inor

High-performance isolation transmitter for bipolar and unipolar mA/V signals with extensive range selection and zero/span adjustment - Inor
 

The Isolation Transmitter IsoPAQ-60P is used for highprecision isolation and conversion of 0-20 mA, 4-20 mA and 0-10 V bipolar and unipolar signals.
Due to the extensive range selection with a choice of 144 input/output signal combinations, the selectable bandwidth and the universal power supply, IsoPAQ-60P is a true universal transmitter for any demanding isolation application.
The zero and span adjustments allow for a fine-tuning of the measurement loop. The high reliability and the Protective Separation are additional features that ensure a safe system operation.

• Extensive range selection
• Zero/Span Adjustment
• Extremely fast response
• Protective Separation acc. to EN 61140
• High accuracy
• Universal power supply for 20 to 253 VAC/DC
• 3-port isolation
• High-density DIN-rail mounting
• Plug-in screw terminals
• Excellent reliability

IsoPAQ-70S - Inor

Basic isolation transmitter for unipolar shunt voltages with calibrated range selection - Inor
 

The Isolation Transmitter IsoPAQ-70S is used for isolation and conversion of unipolar shunt voltages into standard mA/V signal. Due to the calibrated range selection and the universal power supply, IsoPAQ-70S provides excellent flexibility and low storage and installation costs.
The high reliability ensures a safe system operation and low maintenance costs.

• Calibrated range selection
• Universal power supply for 20 to 253 VAC/DC
• 3-port isolation
• High-density DIN-rail mounting
• Plug-in screw terminals
• Excellent reliability

IsoPAQ-80S - Inor

High-performance isolation transmitter for bipolar and unipolar shunt voltages with extensive range selection and zero/span adjustment - Inor
 

The Isolation Transmitter IsoPAQ-80S is used for high-precision isolation and conversion of bipolar and unipolar shunt voltages into standard mA/V signals.
Due to the extensive range selection, the selectable bandwidth and the universal power supply, IsoPAQ-80S is a true universal transmitter for any demanding shunt voltage isolation application.
The zero and span adjustments allow for a fine-tuning of the measurement loop.
The high reliability and the Protective Separation are additional features that ensure a safe system operation.

• Extensive range selection
• Zero/Span Adjustment
• Extremely fast response
• Protective Separation acc. to EN 61140
• High accuracy
• Universal power supply for 20 to 253 VAC/DC
• 3-port isolation
• High-density DIN-rail mounting
• Plug-in screw terminals
• Excellent reliability

IsoPAQ-110L - Inor

1- & 2-channel loop powered isolators for 0(4)-20 mA signals - Inor
 

IsoPAQ-110L is a loop powered isolator, available in 1- and 2-channel versions. It is used for electrical isolation of 0(4)-20 mA signals to avoid measurement errors due to different voltage potentials or ground loops in an instrument installation.

The 2-channel version, IsoPAQ-110L offers a very cost effective alternative combined with a high-density mounting. The isolator need no power supply, which contributes to reduced installation costs compared to Isolation Transmitters.

The high reliability ensures a safe system operation and low maintenance costs.

• Input to output galvanic isolation
• 1- and 2-channel versions
• No power supply required
• Fixed ranges
• Protective Separation acc. to EN 61140
• Compact DIN-rail mounting

IsoPAQ-110R - Inor

Transmitter repeater for powering and isolation of 2-wire transmitters - Inor
 

IsoPAQ-110R is a Transmitter Repeater for powering and isolation of a non-isolated 2-wire transmitter.
Thanks to the isolation, the 4-20 mA transmitter signal can be connected to a grounded input circuit of a control system without risk for measurement errors due to ground loops.
The Transmitter Repeater needs no power supply, which contributes to reduced installation costs.
The high reliability ensures a safe system operation and low maintenance costs.

• Transmitter isolation
• Transmitter powering
• High accuracy
• HART communication
• Fixed ranges
• Protective Separation acc. to EN 61140
• Compact DIN-rail mounting

IsoPAQ-131P - Inor

Isolation transmitter for unipolar mA/V signals with fixed ranges - Inor
 

The Isolation Transmitter IsoPAQ-131P is used for isolation and conversion of 0-20 mA, 4-20 mA and 0-10 V unipolar signals.
For applications where normally one signal combination only is used, IsoPAQ-131P offers a cost-effective alternative.
The high reliability and the Protective Separation are further features, which ensure a safe system operation.

• 3-port isolation
• Fixed ranges
• Universal power supply for 24 VAC/DC
• Protective Separation acc. to EN 61140
• Compact DIN-rail mounting
• Excellent reliability

IsoPAQ-161P - Inor

Isolation transmitter for bipolar and unipolar mA/V signals with fixed ranges - Inor
 

The Isolation Transmitter IsoPAQ-161P is mainly used for isolation of bipolar signals, such as ±20 mA, ±10 mA, ±10 V, ±5 V, and conversion into unipolar output signals.
For applications where normally one signal combination only is used, IsoPAQ-161P offers a cost-effective alternative. The high reliability and the Protective Separation are further features, which ensure a safe system operation.

• 3-port isolation
• Bipolar input signals
• Fixed ranges
• Universal power supply for 24 VAC/DC
• Protective Separation acc. to EN 61140
• Compact DIN-rail mounting
• Excellent reliability

IsoPAQ-610 - Inor

Transmitter repeater for powering and isolation of 2-,3- and 4-wire transmitters - Inor
 

The Repeater Power Supply IsoPAQ-610 is used to supply and separate 2- and 3-wire SMART Transmitters and active sensor signals with HART communication.

It supplies the transmitter with power and transmits the measuring signal with high accuracy galvanic isolated to the output. Alternative the measuring input accepts active 0/4 … 20 mA signals from 4-wire transmitters.

In addition to the analog signal, the IsoPAQ-610 also transmits data protocols for HART communication. It allows bidirectional communication with the field device from every point of the cabling.

The auxiliary power can be supplied via the connection terminals or via the optional In-Rail-Bus connector. A green LED on the front of the unit has been provided to monitor the power supply.

IsoPAQ-611 - Inor

1-channel loop powered isolator for separation of 0(4)-20 mA signals - Inor
 

The input loop-powered isolator IsoPAQ-611 provides galvanic separation for 0(4) … 20 mA standard signals, while transferring the measurement signal to the output with a high degree of accuracy.

The unit avoids interference voltage carry-over and effectively suppressing parasitic noise. The very low drop voltage of 2.3 V and the high level of accuracy work together to make the IsoPAQ-611 the first choice in system design.

Intelligent design and their consequential avoidance of highly integrated components result in extremely long service lives and reliability – without any falsification of the measurement signal.

The IsoPAQ-611 requires no additional power supply since the auxiliary power is obtained from the input signal without distorting it. This not only saves costs during installation, but also increases reliability.

IsoPAQ-612 - Inor

2-channel loop powered isolator for separation of 0(4)-20 mA signals - Inor
 

The input loop-powered isolator IsoPAQ-612 provides galvanic separation for 0(4) … 20 mA standard signals, while transferring the measurement signal to the output with a high degree of accuracy.

The unit avoids interference voltage carry-over and effectively suppressing parasitic noise. The very low drop voltage of 2.3 V and the high level of accuracy work together to make the IsoPAQ-612 the first choice in system design.

Intelligent design and their consequential avoidance of highly integrated components result in extremely long service lives and reliability – without any falsification of the measurement signal.

The IsoPAQ-612 requires no additional power supply since the auxiliary power is obtained from the input signal without distorting it. This not only saves costs during installation, but also increases reliability.

IsoPAQ-641 - Inor

High-performance isolation transmitter for mA/V Signals with calibrated range selection - Inor
 

The Isolation Amplifier IsoPAQ-641 is used for isolation and conversion of 0/4 … 20 mA and 0/2 … 10 V standard signals.

The input and output range of IsoPAQ-641 can be easily set by using DIP switch. Due to the calibrated range selection no further adjustment is necessary. Also the cut-off frequency can be adapted to the measurement task by using the DIP Switch.

The auxiliary power can be supplied via the connection terminals or via the optional In-Rail-Bus connector. A green LED on the front of the unit has been provided to monitor the power supply.

IsoPAQ-661 - Inor

Isolation transmitter for bipolar and unipolar mA/V signals with calibrated range selection - Inor
 

The Bipolar Isolation Amplifier IsoPAQ-661 is used for isolation and conversion of bipolar and unipolar industrial standard signals.

The input and output range of IsoPAQ-661 can be easily set by using DIP switch. Due to the calibrated range selection no further adjustment is necessary.

A switchable compensation of the measuring range can be performed at the Zero/Span potentiometers on the front panel. Also the cut-off frequency can be adapted to the measurement task by using the DIP Switch.

The auxiliary power can be supplied via the connection terminals or via the optional In-Rail-Bus connector. A green LED on the front of the unit has been provided to monitor the power supply.