info@tempcontrol.nl | +31 (0) 15 251 18 31

IsoPAQ-632 - Inor

IsoPAQ-632 Signal splitter/repeater with double outputs for mA and V signals - Inor

Signal splitter/repeater with double outputs for mA and V signals - Inor
 

The Signal Splitter/Repeater IsoPAQ-632 is used for isolation, conversion and distribution of 0/4 … 20 mA, 0/1 … 5 V and 0/2 … 10 V standard signals. The measuring input can also supply the loop power for 2-wire transmitters.

The input and two isolated outputs can be easily configured by using DIP switch. Due to the calibrated range selection no further adjustment is necessary.

The auxiliary power can be supplied via the connection terminals or via the optional In-Rail-Bus connector. A green LED on the front of the unit has been provided to monitor the power supply.

Main features

  • Calibrated signal setting via DIP switch
    Input and outputs can be set by using DIP switch – high precision without any further adjustment
  • 4-Port isolation
    Protection against erroneous measurements due to parasitic voltages or ground loops
  • Extremely slim design
    6.2 mm slim housing for a simple and space saving
    DIN rail mounting
  • Optional In-Rail-Bus mounting rail connector
    Allows for fast and economical installation
  • Protective Separation acc. to EN 61140
    Protects service personnel and downstream devices against impermissibly high voltage
  • Maximum reliability
    No maintenance costs

Downloads

More information