J1 - J series - Ascon Tecnologic

5 digit configurable display colour indicator - Ascon Tecnologic
 

• Panel mount indicator 96 x 48 mm
• 1 Universal input
• Up to 2 alarm outputs
• Display and value indication inclusive of peak and valley and value hold
• RS 485 port with ModBus RTU Protocols (optional)
• 1 display, 5 digits, h: 15.5 mm, configurable green or red colour

J3 - J series - Ascon Tecnologic

5 digit configurable display colour indicator - Ascon Tecnologic
 

• Panel mount indicator 96 x 48 mm
• 1 Universal input
• 1 Auxiliary high level input (optional)
• 1 retransmission output (optional)
• Display of IN1, IN or CIN inclusive of value, peak and valley and hold value
• RS 485 port with ModBus RTU Protocols (optional)
• 1 display, 5 digits, h: 15.5 mm, configurable green or red colour

J5 - J series - Ascon Tecnologic

Indicator and transmitter with strain gauge input - Ascon Tecnologic
 

• Panel mount indicator 96 x 48 mm
• 1 high level or strain gauge input
• 1 Auxiliary high level input (optional)
• 1 retransmission output (optional)
• Automatic calibration routine
• Tare function for load cells
• Display of IN1, IN or CIN inclusive of value, peak and valley and hold value
• RS 485 port with ModBus RTU Protocols (optional)
• 1 display, 5 digits, h: 15.5 mm, configurable green or red colour

K31V - KV series - Ascon Tecnologic

Indicator 4 outputs and RS485 - Ascon Tecnologic
 

• Panel mount indicator: 78 x 35 mm, depth 75.5 mm
• 1 Configurable probe input
• 2 digital inputs
• Up to 4 outputs
• Built-in independent timer
• Counter for worked days and hours
• TTL or RS485 Modbus-RTU ports
• 1 display line, 4 digit, h: 12 mm, red colour

K38V - KV series - Ascon Tecnologic

Digital Indicator, 1 input and 2 outputs - Ascon Tecnologic
 

• Panel mount indicator: 78 x 35 mm, depth 75.5 mm
• 1 temperature probe input
• Up to 2 outputs
• Counter for worked days and hours
• 1 display line, 4 digit, h 12 mm, red or blue colour

K48V - KV series - Ascon Tecnologic

Digital Indicator, 1 input, 3 output and RS485 - Ascon Tecnologic
 

• Panel mount indicator: 48 x 48 mm (1/16 DIN)
• 1 temperature probe input
• Up to 3 digital outputs
• Counter for worked days and hours
• 5 Pole TTL Port
• 1 display line, 4 digit, h: 12 mm, red colour

K85V - KV series - Ascon Tecnologic

4 modules DIN Rail mount indicator - Ascon Tecnologic
 

• DIN Rail mount indicator: 70 x 84 mm, depth 60 mm (4 DIN module)
• 1 temperature probe input
• Up to 3 digital outputs
• Up to 3 configurable alarms + loop break alarm
• 1 display line, 4 digit, h: 12 mm, red colour

LCD-H20 - Inor

Loop powered LCD indicator for in-head mounting - Inor
 

LCD-H20 is a digital indicator for installation directly in a 4-20 mA loop without need for external power. LCD-H20 is designed for in-head mounting in a sensor connection head with glass window.
The indicator is equipped with high-contrast, easy-to-read LCD digits. The scale is easily programmable, without reference signal, by three pushbuttons for any values between -1999 and 9999.
As an option, LCD-H20 can be delivered mounted in a connection head.

• Installation directly in a 4-20 mA loop without need for power supply
• 2.5 V voltage drop
• High-contrast, 4-digit LCD display with 12 mm digits
• Simple pushbutton scaling without reference signal
• Any range between -1999 to 9999 for 4 to 20 mA input
• Labels for different engineering units are included
• Typical accuracy of 0.1 % allows for high precision read-outs
• HART transparent
• Designed for ambient temperatures between -20 to +70 °C /-4 to +158 °F
• Protection IP65 when mounted in connection head Type 1 or Type 2

LCD-W11 - Inor

Loop powered LCD indicators for field mounting - Inor
 

LCD-W11 is a digital indicator for installation directly in a 4-20 mA loop without need for external power. The indicator comes with a high-contrast LCD display and the scale is easily programmable without reference signal.
LCD-W11 is designed for field mounting on wall, pipe or DIN rail and has a rugged and splash proof housing.
A temperature transmitter can be integrated for direct sensor input.

• High-contrast, 4-digit LCD display with 17.8 mm / 0.7 ” digits
• Installation directly in a 4-20 mA loop without need for separate power supply
• Simple pushbutton scaling without reference signal
• Any range between -1999 to 9999 for 4 to 20 mA input
• Labels for different engineering units are included
• Typical accuracy of 0.05 % allows for high precision read-outs
• HART transparent
• Integrated transmitter as added option
• Field mounting in rugged IP65 / NEMA 4X housing with double cable conduits

LCD-W12 - Inor

LCD indicator for direct connection to the ProfIPAQ-H/-L transmitters - Inor
 

LCD-W12 is a digital, high-precision LCD indicator for local measurement of process values and sensor failure monitoring. It connects directly to the communication port of our PROFIBUS transmitters, ProfIPAQ-H and ProfIPAQ-L. It can be connected and disconnected at any time.
LCD-W12 communicates digitally with the transmitters and offers unlimited accuracy as well as temperature and long-term stability. There is no need for scale adjustments or calibration of the indicator.
LCD-W12 is designed for field mounting on wall, pipe or DIN rail and has a rugged and splash proof housing.

• High-contrast, 4-digit LCD display with 17.8 mm/0.7 ” digits
• No power supply needed, supplied by the transmitter
• Also suitable for temporary measurements
• Unlimited accuracy and stability – Values supplied by transmitter digitally
• Display range stored in the transmitter, no calibration needed
• Display values between -1999 and 9999
• Indicates sensor failures (break, short-circuit and low isolation)
• Labels for different engineering units are included
• Designed for ambient temperatures between -20 to +80 °C / -4 to +176 °F
• Field mounting on wall, 2 ” pipe or DIN-rail
• Rugged IP65 / NEMA 4X housing

LED-W11 - Inor

Loop powered LED indicator for field mounting - Inor
 

LED-W11 is a digital indicator for installation directly in a 4-20 mA loop without need for external power. The indicator is equipped with bright, easy-to-read LED digits, and the scale is easily programmable without reference signal.
LED-W11 is designed for field mounting on wall, pipe or DIN rail and has a rugged and splash proof housing.
A temperature transmitter can be integrated for direct sensor input.

• Bright, 4-digit LED display with red 14.2 mm / 0.56 ” digits
• Installation directly in a 4-20 mA loop without need for separate power supply
• Simple pushbutton scaling without reference signal
• Any range between -1999 to 9999 for 4 to 20 mA input
• Labels for different engineering units are included
• Typical accuracy of 0.05 % allows for high precision read-outs
• HART transparent
• Integrated transmitter as added option
• Field mounting in rugged IP65 / NEMA 4X housing with double cable conduits

LED-W11X - Inor

Loop powered, Ex-approved LED indicator for gas zone 1 & 2 - Inor
 

LED-W11X is a digital indicator for installation directly in a 4-20 mA loop without need for external power. The indicator is equipped with bright, easy-to-read LED digits. LED-W11X is designed for field mounting on a wall or, by means of mounting kit, on a pipe or a DIN-rail. It has a rugged and splash proof housing with protection IP65/NEMA 4X.
The scale is easily programmable, without reference signal, by two internal pushbuttons for any values between -1999 and 9999. A temperature transmitter can be integrated for direct sensor input.

• Intrinsically Safe for gas Zone 1 & 2
• Bright, 4-digit LED display with red 14.2 mm (0.56 ”) digits
• Installation directly in a 4-20 mA loop without need for power supply
• Simple pushbutton scaling without reference signal
• Any range between -1999 to 9999 for 4 to 20 mA input
• Labels for different engineering units are included
• Typical accuracy of 0.05 % allows for high precision read-outs
• HART transparent
• Built-in temperature transmitter as an option
• Field mounting in rugged IP65 / NEMA 4X housing with double cable conduits

TLI40 - Ascon Tecnologic

Digital indicator - Ascon Tecnologic
 

• Panel mount indicator: 48 x 48 mm, depth 98 mm (1/16 DIN )
• 1 temperature probe input
• Up to 4 outputs
• RS 485 serial interface
• 1 display 4 digits, h 12 mm, red colour, 3 LED Bargraph

X31L - Ascon Tecnologic

Alarms and generic events display - Ascon Tecnologic


The model X31L is an Alarms/events signaling device. The Alarms / events are shown on the 3 digit display and can be detected by10 digital inputs for voltage free contacts or voltage (24 VAC / VDC) whose operation is completely configurable. The instrument can also be equipped with an internal relay and a buzzer that is the sound system for alarms. The model X31SL has the “S-touch” capacitive sensor keyboard system.