Features

• Panel mount indicator 96 x 48 mm
• 1 Universal input
• 1 Auxiliary high level input (optional)
• 1 retransmission output (optional)
• Display of IN1, IN or CIN inclusive of value, peak and valley and hold value
• RS 485 port with ModBus RTU Protocols (optional)
• 1 display, 5 digits, h: 15.5 mm, configurable green or red colour

Properties 

Process inputs:

• 1 Main Input IN1
  • Thermocouples: L, J, T, K, S, R, B, N, E, Ni-NiMo, W3, W5
  • RTD: Pt100
  • Voltage (mV):0/10...50 mV
  • Current (mA): 0/4...20 mA (with 2.5 Ω shunt resistor)
  • Custom linearisation and IR probes (J.K type)
• Accuracy : 0.25% ±1 digit (probes) or 0.1% ±1 digit (mA or mV)
• Auxiliary input IN2 (Optional)
• Voltage (V):  0/1...5 V, 0...10V
• Current (mA): 0/4...20 mA
• Resolution: 16 Bit

3 digital inputs:

• NPN
• TTL
• Free Voltage
• Keyboard

Mechanical: 3 multifunction keys + 1 dedicated for alarm acknowledge

Process outputs: 1 High level analogue output: - Current (mA): 0/4...20 mA

Up to 4 Optional outputs: OUT1 - RELAY SPDT, 2A/250Vac OUT2 - RELAY SPST-NO, 2A (250VAC) OUT3 - RELAY SPST-NO, 2A (250VAC) OUT4 - RELAY SPST-NO, 2A (250VAC) - SSR Drive 0...5Vdc, ±20%, 30 mA Max

Power supply:

• 24VDC/VAC
• 100… 240 Vac (50/60 Hz)
• Transmitter power supply: 24 Vdc ±20%, 30 mA Max

Functions:

• Calculated value (CIN) Selectable between
  • IN1 or IN2
  • IN1 + IN2
  • IN1 – IN2
  • IN1 * IN2
  • IN1/IN2
  • (IN1 + IN2)/2 (average)
  • MAX (IN1, IN2) (maximum value)
  • Min (IN1, IN2)  (minimum value)

Display indication of:

• Main input IN1
• Auxiliary input IN2
• Calculated Value CIN
• Peak and Valley indication
• Hold and temporized indication

Alarms:

• Up to 4 configurable alarms
• ISA-A Acknowledge function

Communication and programming: Interfaces RS 485 port with ModBus RTU and J-bus (slave) protocols (optional)

Programming/configuration tools:

• Code selection
• Easy to use front interface for configuration
• Configuration software available for PC

Installation:

• Mounting method: panel mount
• Case dimensions: 96 x 48 mm, depth 110 mm (1/8 DIN)

Connections:

• Signals connection
• 36 poles 5.5 mm² screw terminals block
• Protection factor : IP 65 front protection

Display and indicators:

• 1 display, 5 digits, h: 15.5 mm, configurable green or red colour
• 4 Alarm and 3 DI LED indicators

Connectable to:

• Any controller from Ascon Tecnologic range with the appropriate I/Os
• SCADA for monitoring, traceability and remote management
• DX and DY gateways for remote monitoring

Downloads